Dynamic Mixers

Euromecc Dynamic mixer arises from the revision of twin shaft mixer “MEB” for single cycle production.

Through accurate modifications applied to shafts, axles and mixing blades, we achieved to satisfy, in a “dynamic” manner, both “batch” and “continuous” production modalities.

The mixing bin was substantially extended and on the bottom we made two openings fitted with exhaust hatches that can be opened oleodinamically. Both exhaust hatches become subservient during the “discontinuous” functioning, while the hatch located at far end of the bin keeps working during the “continuous” functionality.
TECHNICAL FEATURES
UM
VALUE
Dry capacity
l
4.200
Fresh concrete output l
3.360
Vibrated concrete output
l
2.800
Mixing motors power kW
2x55
Hidraulic power kW
2,2
Continuous output
m3/h
300
Mixing arms n
20
Dry weigh
kg
8100
Max. aggregates size mm
50
STANDARD EQUIPMENT
    High quality materials and components ensure maximum wear resistance:
  • Arms in spheroidal cast-iron GS 600
  • Bushings for mixing axle protection. Gasket system connected with polyurethane rings and mechanic seals in grinded steel and grease pumping inside the seals compartments, for perfect greasing and insulation.
  • Tank with staggered plates for wear reduction, equal to the material, with consequent reduction of maintenance costs.
  • Automatic greasing control unit with 4kg tank.
  • Diagnostic control unit with PLC for alarms management and black box for faults record.
  • Discharge opening with oil-pressure activated command with three inductive limit switches (positions: Open, Half-opened and Close).
  • Engines high positioned to simplify belts tensioning and the access to the inferior part of the mixer.
  • Gas springs to easy lift inspection doors without strain.
euromecc-mixer-dynamic
euromecc-mixer-dynamic2
euromecc-mixer-dynamic3