Conveyors

Conveyors and bucket elevators for materials’ handling

The bucket elevator constitutes a valid solution of transportation when a great elevation is required and there aren’t horizontal spaces. Euromecc realizes bucket elevators for every height and capacity, with heads and reinforced sheet chassis with single or double cane. The use of special belts allows the realization of bucket elevators suitable to transport aggregates as sand, gravel, cement, etc. with an elevated specific weight.
EXTRACTOR BELTS

For the extraction of aggregates, after the weighing, from aggregate bins.
CONVEYOR BELTS

To convey aggregates into the loading point or in high points. They are divided into two categories:
  • with flat sheet for inclinations higher than 20°
  • with shaped sheet for inclinations higher than 28°
  • BUCKET ELEVATORS

    The bucket elevator constitutes a valid solution for the transport when a great elevation is required and there aren’t horizontal spaces. Euromecc realizes bucket elevators for every height and capacity, with heads and reinforced sheet chassis with single or double cane. The use of special belts allows the realization of bucket elevators suitable to the transport of aggregate as sand, gravel, cement, etc. with an elevated specific weight.
    VOLUMETRIC BELTS

    Mostly used in plants with aggregates volume dosage instead of weight.
    RADIAL BELTS

    Specific belts, able to rotate on a rail for ground aggregate feeding to the plant, in absence of the ramp.
    REVERSIBLE BELTS

    Horizontal belts installed on the top of the plant to load each bin.
    RECTILINEAR SHUTTER CONVEYORS

    Suitable for handling of heavy packages or hot, abrasive or big materials.
    OFF-THE SHELF ACCESSORIES:

  • Widia scraper
  • SKF frames
  • Self-lubricating galvanized roller
  • Motor roller covered with non-slip rubber
  • Commuter gearbox (with gears in oil bath)


  • ACCESSORIES TO COMPLETION:

  • Upper covering for belt realized with removable galvanized plates
  • Lower covering for belt to gather aggregates’ remains, realized with removable 2 mm galvanized plates, equipped with unloading funnel
  • Lateral galvanized gangway, built in UPN 100 and planking level realized with 4 mm stretched plate, parapet 1000 mm high for the entire length
  • Galvanization
  • Non-obstruction device
  • Belt scrapers